PML error
Hello I am attempting to use a PML in the acoustics-piezoelectric interaction frequency domain module. I choose cartesian coordinates type as I am working with parallelpiped geometry. When I attempt to...
View ArticleWaveguide Verification time domain (TE10)
Hello! I am testing COMSOL with a simple 2D model of a waveguide for the TE10 mode (physics: transient electromagnetic waves, study: time dependent), i am using the scattering boundary condition for...
View Articleabout heater simulation in the room
Hello! I am use comsol 4.3a , and use the non-isothermal flow physics to simulate the heater in the room. And the room has a door , and I want to set the door is open, and it is connect to the...
View ArticleThin liquid film with thermal gradient in contact with air (tpf, ht, ALE, AMR)
Dear all, I am modelling a thin film liquid in a rectangular channel (2mm), as well as the air on top of it. At the initial condition everything is within room temprature (Tc) then one side of the...
View ArticlePostprocessing-visualization of symmetric profiles
I solved the thermal stresses in a plate using two faces of symmetry, saving computational cost. I wonder if COMSOL allows me to mirror the two symmetric faces and visualize the deformation in the full...
View ArticleVarying the order of diffraction in Plasmonic Wire Grating
Hi, I am simulating in Comsol 4.2.I started simulating the PLASMONIC WIRE GRATING given in the model library.the simulation there is done by varying the angle of incidence.(in the parametric sweep...
View ArticleEvaluate parameter value in MATLAB
Hi, If I have a parameter, e.g.:>> model.param.set('outer_z', '((volume*formfactor^2)/(2*pi))^(1/3)'); How can I in the easiest way evaluate the value of this parameter (like the 'Value'-column...
View ArticleFluid-Porous Slip boundary conditon
Hello, I focus now on the flow and solute transportation simulation in the free flow and porous media. There are traditionally one singe formulation, typically Brinkman and two-domain coupling with...
View ArticleUnable to create mesh : Error Free Tetrahedral 1
Hi everybody, I am having this error when I try to mesh a 3D structure : The following features have problems : Features : Free Tetrahedral 1 I don't find a way to have more information about this...
View ArticleEffect of prestress on eigenfrequency
Hello, I am trying to model the effect of the prestress on eigenfrequency of a vibrating string (clamped at both end with a prestress) The problem is that I am using 3.4 here. Would you please let me...
View ArticleEvaluation of Volumteric displacement
Hi all, I am modelling a diaphragm deformed under pressure loading in an axisymetric model. I was wondeing if there is a way to evaluate volumetric displacemnt of the diaphrgam due to displacement....
View ArticleLinking a Porous Media Flow to a Transport of Concentrated Species
Hello, I have created a chamber that has sugar water running through a compartment and carbon cloth modeled by a free and porous media flow physics. I also want to create a transport of a concentrated...
View ArticleCoupling B/W two solid stress-strain modules
Hi all, I am trying to model a 3D structural mechanics problem with two separate solid stress-strain modules coupled together at the interfacial boundary through equal displacement boundary condition...
View ArticleGeneral Projection Bulk Temperature Example & Question
Dear all, The following model may prove useful to somebody (other than myself) who wishes to calculate the average of some scalar value as a function of axial distance. In this case it's the bulk fluid...
View ArticleTypical fluid-structure interaction model
Hi I am new and struggling to start a simple model. I have been playing with blood vessel model from the model library. I would like to look at the vascular behavior when blood vessel is impacted by a...
View ArticleHow to apply harmonic and random vibration's load?
Hello, I want to know how to apply harmonic and random vibration 's load in comsol v4.2, my previous operation is that first, apply a boundary load, then give a range of frequency, am I right? or...
View ArticleInduced charge on a surface by a charged object at different relative positions
Hello, I am new in COMSOL and I was wondering if anyone could five me any idea. I want to simulate the evolution of the induced charge on a surface as the relative position to a charged object varies,...
View ArticleElectric potential boundary on thin structure
Hi! My model contains a thin film with a thickness of 30 nm. I have applied different potentials and grounds on the thin boundaries of this film without any problems, but now I'm trying to apply these...
View ArticleTransport of concentrated species, Membrane gas separation
I've attached simplified model describing transport of the one component through membrane. I've made it simple to make you catch a problem easily. In my advanced model I'm using Laminar Flow physics...
View ArticleCircumferential direction
Hi My equations are in default cartesian(x,y,z) coordinates. But my geometry is circular and I want to see the temperature distribution only in circumferential direction. It would have been better if I...
View Article