wireless power transmission, 2 coil's

Dear all,
I'm still relatively new to comsol but have some exercises through. Now to my task. I want to simulate an inductive transformer.

N1= 21
N2=18
f=140kHz
R1 R2
-----------|=====|-------- -------------|=====|-------
| N1 | | N2 |
(sin) ||||||| |||||| |
| | | |
------------------------------ -------------------------------
|
-----
--


netlist
V1 N001 0 SINE(0 330 140000)
R1 N002 N001 1
L1 N002 0 L ---canget to
R2 N003 0 1
L2 N003 0 L
.backanno
.end

As example, i have oriented me during my model to the ecore transformer which can be found here on the website.

Now the model
Primary coil is a multi-turn coil domain modeled, secondary coil is also modeled as a multi-turn coil domain second
I have the netlist for LTspice imported and the inductivitäten replaced with I vr U.

Now to evaluate and the calculations

Study 1
cc calc
cc calc2
FD direct and full coupled


results
1. no current flows through R1
2. Z = 111 +79i Ohm is much too large, the R real must not exceed 3Ohm

I not looked at the values ​​on the secondary side. Since the values on the primary side ​​are not correct.

I also upload my model was easy someone can help me here.
perhaps someone can help me here.
Best regards Viktor