Hi,
I'm using the Parametric Sweep in order to change the location of a point who separate edge into two lengths; each has a different boundary condition. (One defined by me and the other one is the default condition -zero flux)
The location of the point (defined by the parameter "d2" in the y-axis and on the edge at the x-axis) defines the distance which is the size controlled by the B.C defined by me.
The problem is, whenever the parameter "d2" been modified, the B.C (who defined by me) go through all of the edge regardless to the point location.
Thank you in advance
I'm using the Parametric Sweep in order to change the location of a point who separate edge into two lengths; each has a different boundary condition. (One defined by me and the other one is the default condition -zero flux)
The location of the point (defined by the parameter "d2" in the y-axis and on the edge at the x-axis) defines the distance which is the size controlled by the B.C defined by me.
The problem is, whenever the parameter "d2" been modified, the B.C (who defined by me) go through all of the edge regardless to the point location.
Thank you in advance