electromagntic propagation through three layers

hello
I am student on electronic and I am trying to simulate with comsol on rf module , in summarize my work is to simulate the sun light propagation through three layers bonded to each other and I had used the floquet periodic condition and this witch include this equations :

Parameter

lambda0= 0.5e-6[m]
k0_emwh = 2*pi/lambda0
alpha1 =30[deg]
n1 1.97235
k1x= k0_emwh*real(n1)*cos(alpha1)
k1y =k0_emwh*real(n1)*sin(alpha1)
freq c/lambda0
c= 3*10^8[m/s]
n2 0.125
alpha2= asin(sin(alpha1)*real(n1/n2))
k2x= k0_emwh*real(n2)*cos(alpha2)
K2y= k0_emwh*real(n2)*sin(alpha2)
n3 1.97235
alpha3 =asin(sin(alpha3)*n2/real(n3))
E0z= exp(-i*k1x*x)
Ez1= E0z[V/m]
k3x= k0_emwh*real(n3)*cos(alpha3)
k3y= k0_emwh*real(n3)*sin(alpha3)

and I put the boundary condition above and below the layers
Periodic condition 1
K vector for folquet periodicity :
k1x
k1y
Port 1
In the front of the layer
Put the wave excitation in this port (on)
Pin=1
Téta(in) = 0
E0= Ez1
Beta =k1y
Port 2
Put the wave excitation in this port (off)
E0= Ez1
Beta =k1y

in this simulation i would like to study the propagation of the electromagnetic wave through three micrometer thickness of material, and each material have property , and my problem when reduce the thickness the electromagnetic wave propagate with difficulty and when i increase the thickness the wave propagate easily, i don't know if my simulation is true.

Thank you for your help